DSO2512G 120M Bandwidth 500MSa/s DSO-TC2 Dual Channel Oscilloscope 10mV Minimum Vertical Sensitivity FFT Spectrum Analysis with High Efficiency(DSO-TC2-2)

Bandwidth, Oscilloscopes, Electronic Measuring Instruments, Measurement & Analysis InstrumentsDSO-TC2 oscilloscope:Features:- Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.- Self-contained 80kHz /5.0V PWM waves test signal source with adjustable duty cycle.- This instrument can automatically identify and measure various transistors. Including NPN transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and passive component such as resistors, inductors, capacitors, etc- Automatic detection of pin definitions.Specifications:Material: ABSType: without adapter, with adapter(optional)Display: 2.4inch color screen with backlightBattery: 1 * lithium battery, 1500mAh(included)Recharging: USB Type-C, 5VPackage size: 140 * 125 * 55mm / 5.5 * 4.9 * 2.2inPackage weight:Without adapter: 296.6g / 10.5ounceWith adapter: 345.6g / 12.2ounceOscilloscope Specifications:Real-tim sample rate: 2.5MS/sAnolog bandwidth: 0-200kHzInput resistance: 1MCoupling: AC/Direct currentTest voltage ranges:1:1 probe: 80Vpp (±40V)10:1 probe: 800Vpp (±400V)Vertical sensitivity: 10mV/Div~10V/Div(in 1-2-5 increments)Vertical displacement: adjustable, with indicationHorizontal time base ranges: 10us/Div~500s/Div (in 1-2-5 increments)Trigger mode: automatic, regular, singleTigger type: rising edge. falling edgeTrigger level: adjustable, with indicationWaveform freeze: yes (HOLD function)Automatic measurement: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cyclePWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0VElectronic Component Tester Specifications:Capacitance measuring ranges: 25pF~100mF(capacitance value, loss factor Vloss)Resistance measuring ranges: 0.01~50MInductance measuring ranges: 10uH~1000uHBattery measuring ranges: 0.1~4.5VInput voltage: 0~16VPWM output: 1.5KHz~9.99MHzWithout Adapter Packing list:1 * Tester1 * Type-C Cable3 * Test Hook1 * ProbeWith Adapter Packing list:1 * Tester1 * Adapter1 * P6100 High Voltage Probe1 * Type-C Cable3 * Test Hook1 * ProbeDSO2512G oscilloscope :Features:Adopts ARM and FPGA chip collocation, provides high-speed signal acquisition and high-speed data processing to give you a smooth use experience and rich functions.When the channel two closed, the bandwidth can reach 120M, the bandwidth is 60M when the channel 1 and 2 open at the same time.Wide applications: can be used for such as sin-gle-chip debugging, car maintenance, home appliance maintenance,DIY debugging, electronic competition, power supplys debugging, frequency converter and so on.The bottom of the oscilloscope can output a variety of waveforms of 2.5V amplitude such as sine waves, square waves, trian-gle waves, half waves, singh waves, among which the frequency adjustment rangesof sine wavesis 0~ 10MHz, the frequency rangesof other waveforms is 0~2MHz, and the accuracy is up to 0.1Hz. Signal generators are widely used, such as square wavesfor new probe calibration, driving MOS tube, etc., sine wavescan be used for testing audio distortion, etc.There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base, -Duty cycle.There are three types of trigger mode: auto, normal and sin-gle, the automatic trigger can update the waveform in real time without triggering, the normal triggerneed have a waveform trigger to update the waveform and the sin-gle trigger will sample a fr-ame of waveform and stop automatically after the k-ey is pressed.Through USB cable connection, the waveform map can be exported to the com-puter (up to 50 at a time) for you re others to use.Support scaling waveform after stopping: after stopping, you can drag the waveform from left to right to find the place you are interested in to expand the observation details and analyze the cause of the problem.Specifications:Material: ABSChannels: 2Coupling: AC/DCPrecision of V: ±2%Bandwidth 120MXY mode: supportSampling rate: 500MScreenshot: support<;3nsFrequency: ±0.01%Storage depth: 128KbitSin-gle: supportImpedance: 1MFFT: supportTime base: 5ns~10sWa-ve out amp: 2.5VVer sensitivity: 10mV/div~10V/divWavesout freq: 10MHz(sin) 2MHz(other)Max voltage ±40V(x1), ±400V(x10)Trigger type: rise/fallDisplay mode: YT/RollPersistence: None/1s /Battery: 1 * lithium battery, 4000mAh (included)Package size:210 * 140 * 115mm / 8.3 * 5.5 * 4.5inPackage weight: 689g / 1.5lbPacking list:1 * Oscilloscope

• 2 In 1 Function: This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.
• This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.
• The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth.
• With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analogs signals and aperiodic digital signals.
• Up to ±400V voltage signal can be measured, has a wide applications.